NINGBO SUNLITE MOTOR CO.,LTD

1. Does the micro deceleration motor not turn after being energized?

In addition to the failure of the micromotor, there may be a failure to properly connect the power supply (although the probability of generation is very small, but this situation is real), or there may be poor contact (the load is set below the rating);

2. The operation of the micromotor is unstable (rotating in time and not rotating in time)

This situation is caused by bad contact, check the wiring, or capacitor situation;

3. The dc motor is rotating in the wrong direction

If it is reversed at the time of positive rotation, positive rotation can check whether the wiring is correct when the reverse, the deceleration ratio of the deceleration motor is different, it may occur that the motor output and the output shaft of the reducer work in the opposite direction (the manufacturer of this miniature deceleration motor will have instructions);

4. Micromotor heating (over 90℃)

Check whether the working voltage and current exceed the rated value and improve;

5. Abnormal sound of micro motor

This kind of problem is more, specific still want to check where there is abnormal sound, contact micromotor manufacturer to solve (generally is the large deceleration motor will have this kind of problem, micromotor manufacturing precision almost will not have this kind of problem).